Ask for Price

A torque limiter is an automatic device that protects mechanical equipment, or its work, from damage by mechanical overload. A torque limiter may limit the torque by slipping (as in a friction plate slip-clutch), or uncouple the load entirely (as in a shear pin).

Ask for Price

The tapered, barbed connector is a commonly encountered component for connecting oxygen delivery devices to flowmeters (e.g. flowmeter on a portable oxygen concentrator, cylinder or wall connected flow meter).

Ask for Price

A hospital bed or hospital cot is a bed specially designed for hospitalized patients or others in need of some form of health care. These beds have special features both for the comfort and well-being of the patient and for the convenience of health care workers.

Ask for Price

Oxygen Flowmeter is a medical device used for oxygen flow measurement in hospitals, its main function is to give oxygen to emergency patients and oxygen to Hypoxic patients at a suitable flow rate. The Oxygen Flowmeter mainly consists of safety valve, flow meter, flow control valve, and humidifier bottle

Ask for Price

The Railway seating Pin Rail is a device that anchors into concrete allowing the user to attach ropes coming from the ceiling to it to secure acrobatic/aerial apparatuses. Features: Strong enough to withstand acrobatic charges on up to 3 different points. Pins are fixed to the pinrail, cannot be removed.

Ask for Price

Bar Lock couplers utilize lock-shear bolts and serrated grip rails to mechanically splice the rebar. The serrated grip rails are embedded in the rebar as the lock-shear bolts are tightened. The heads of the lock-shear bolts are designed to shear off at a prescribed torque to ensure proper installation.

Ask for Price

The laser nozzle is one of the most important parts of a fiber laser cutting machine. It is installed at the bottom of the laser head, laser power and high-pressure airflow are emitted through the nozzle, which is related to the cutting quality and service life of the laser cutting equipment.

Ask for Price

A nozzle is often a pipe or tube of varying cross sectional area, and it can be used to direct or modify the flow of a fluid (liquid or gas). Nozzles are frequently used to control the rate of flow, speed, direction, mass, shape, and/or the pressure of the stream that emerges from them.

Ask for Price

The valve's body is the outer casing of most or all of the valve that contains the internal parts or trim. The bonnet is the part of the encasing through which the stem (see below) passes and that forms a guide and seal for the stem. The bonnet typically screws into or is bolted to the valve body.

Ask for Price

UNF stands for 'Unified Fine', which is also a popular thread in the United States. UNF fixings are often used in the automotive and aerospace industries industry because of the requirement for tight, fine threads. UNF fasteners are typically made from steel or stainless steel fasteners.

Ask for Price

The range of Brass switchgear parts are extremely reliable and durable providing precise performance. They require less maintenance. The comprehensive range of Brass Switchgear Parts are manufactured and exported based on custom specification and requirements.

Ask for Price

The chassis of an automobile incorporates all the major assemblies consisting of an engine, components of transmission system such as clutch, gearbox, propeller shaft, axles, a control system such as brakes and steering, and suspension system of the vehicle

Ask for Price

CNG is natural gas compressed under pressure so that more of it occupies lesser volume in your fuel tank. CNG is compressed to a pressure of 200 to 250 kg/cm2. In this compressed form, it occupies less than 1 per cent of its volume at atmospheric pressure.

Ask for Price

A grid coupling is composed of two shaft hubs, a metallic grid spring, and a split cover kit. Torque is transmitted between the two coupling shaft hubs through the metallic grid spring element. Like metallic gear and disc couplings, grid couplings have a high torque density.

Ask for Price

Precision turned components are produced by CNC turning, which can be made with CNC screw machines or CNC lathes. CNC screw machines are multi-spindle, which allows the processing of several parts at the same time while achieving high production capacities

Ask for Price

Hydraulic adapters are used to connect hoses, tubes, and pipes of different sizes and specifications. They come in many different types and are commonly made from aluminum, steel, stainless steel, and black iron. Fittings Learning Center.